/* -*- Mode: C; c-basic-offset:4 ; indent-tabs-mode:nil -*- */ /* * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana * University Research and Technology * Corporation. All rights reserved. * Copyright (c) 2004-2013 The University of Tennessee and The University * of Tennessee Research Foundation. All rights * reserved. * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, * University of Stuttgart. All rights reserved. * Copyright (c) 2004-2005 The Regents of the University of California. * All rights reserved. * Copyright (c) 2012-2017 Los Alamos National Security, LLC. All rights * reserved. * Copyright (c) 2012-2022 Cisco Systems, Inc. All rights reserved * Copyright (c) 2015-2017 Research Organization for Information Science * and Technology (RIST). All rights reserved. * Copyright (c) 2016-2017 Intel, Inc. All rights reserved. * Copyright (c) 2017 IBM Corporation. All rights reserved. * $COPYRIGHT$ * * Additional copyrights may follow * * $HEADER$ */ #include "opal_config.h" #include #include #include #include "opal/class/opal_list.h" #include "opal/class/opal_object.h" #include "opal/mca/threads/mutex.h" #include "opal/util/argv.h" #include "opal/util/cmd_line.h" #include "opal/util/opal_environ.h" #include "opal/util/output.h" #include "opal/constants.h" #include "opal/mca/base/mca_base_var.h" /* * Some usage message constants * * Max width for param listings before the description will be listed * on the next line */ #define PARAM_WIDTH 25 /* * Max length of any line in the usage message */ #define MAX_WIDTH 76 /* * Description of a command line option */ struct ompi_cmd_line_option_t { opal_list_item_t super; char clo_short_name; char *clo_single_dash_name; char *clo_long_name; int clo_num_params; char *clo_description; opal_cmd_line_type_t clo_type; char *clo_mca_param_env_var; void *clo_variable_dest; bool clo_variable_set; opal_cmd_line_otype_t clo_otype; }; typedef struct ompi_cmd_line_option_t ompi_cmd_line_option_t; static void option_constructor(ompi_cmd_line_option_t *cmd); static void option_destructor(ompi_cmd_line_option_t *cmd); OBJ_CLASS_INSTANCE(ompi_cmd_line_option_t, opal_list_item_t, option_constructor, option_destructor); /* * An option that was used in the argv that was parsed */ struct ompi_cmd_line_param_t { opal_list_item_t super; /* Note that clp_arg points to storage "owned" by someone else; it has the original option string by reference, not by value. Hence, it should not be free()'ed. */ char *clp_arg; /* Pointer to the existing option. This is also by reference; it should not be free()ed. */ ompi_cmd_line_option_t *clp_option; /* This argv array is a list of all the parameters of this option. It is owned by this parameter, and should be freed when this param_t is freed. */ int clp_argc; char **clp_argv; }; typedef struct ompi_cmd_line_param_t ompi_cmd_line_param_t; static void param_constructor(ompi_cmd_line_param_t *cmd); static void param_destructor(ompi_cmd_line_param_t *cmd); OBJ_CLASS_INSTANCE(ompi_cmd_line_param_t, opal_list_item_t, param_constructor, param_destructor); /* * Instantiate the opal_cmd_line_t class */ static void cmd_line_constructor(opal_cmd_line_t *cmd); static void cmd_line_destructor(opal_cmd_line_t *cmd); OBJ_CLASS_INSTANCE(opal_cmd_line_t, opal_object_t, cmd_line_constructor, cmd_line_destructor); /* * Private variables */ static char special_empty_token[] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, '\0'}; /* * Private functions */ static int make_opt(opal_cmd_line_t *cmd, opal_cmd_line_init_t *e); static void free_parse_results(opal_cmd_line_t *cmd); static int split_shorts(opal_cmd_line_t *cmd, char *token, char **args, int *output_argc, char ***output_argv, int *num_args_used, bool ignore_unknown); static ompi_cmd_line_option_t *find_option(opal_cmd_line_t *cmd, const char *option_name) __opal_attribute_nonnull__(1) __opal_attribute_nonnull__(2); static int set_dest(ompi_cmd_line_option_t *option, char *sval); static void fill(const ompi_cmd_line_option_t *a, char result[3][BUFSIZ]); static int qsort_callback(const void *a, const void *b); static opal_cmd_line_otype_t get_help_otype(opal_cmd_line_t *cmd); static char *build_parsable(ompi_cmd_line_option_t *option); /* * Create an entire command line handle from a table */ int opal_cmd_line_create(opal_cmd_line_t *cmd, opal_cmd_line_init_t *table) { int ret = OPAL_SUCCESS; /* Check bozo case */ if (NULL == cmd) { return OPAL_ERR_BAD_PARAM; } OBJ_CONSTRUCT(cmd, opal_cmd_line_t); if (NULL != table) { ret = opal_cmd_line_add(cmd, table); } return ret; } /* Add a table to an existing cmd line object */ int opal_cmd_line_add(opal_cmd_line_t *cmd, opal_cmd_line_init_t *table) { int i, ret; /* Ensure we got a table */ if (NULL == table) { return OPAL_SUCCESS; } /* Loop through the table */ for (i = 0;; ++i) { /* Is this the end? */ if ('\0' == table[i].ocl_cmd_short_name && NULL == table[i].ocl_cmd_single_dash_name && NULL == table[i].ocl_cmd_long_name) { break; } /* Nope -- it's an entry. Process it. */ ret = make_opt(cmd, &table[i]); if (OPAL_SUCCESS != ret) { return ret; } } return OPAL_SUCCESS; } /* * Append a command line entry to the previously constructed command line */ int opal_cmd_line_make_opt_mca(opal_cmd_line_t *cmd, opal_cmd_line_init_t entry) { /* Ensure we got an entry */ if ('\0' == entry.ocl_cmd_short_name && NULL == entry.ocl_cmd_single_dash_name && NULL == entry.ocl_cmd_long_name) { return OPAL_SUCCESS; } return make_opt(cmd, &entry); } /* * Create a command line option, --long-name and/or -s (short name). */ int opal_cmd_line_make_opt3(opal_cmd_line_t *cmd, char short_name, const char *sd_name, const char *long_name, int num_params, const char *desc) { opal_cmd_line_init_t e; e.ocl_mca_param_name = NULL; e.ocl_cmd_short_name = short_name; e.ocl_cmd_single_dash_name = sd_name; e.ocl_cmd_long_name = long_name; e.ocl_num_params = num_params; e.ocl_variable_dest = NULL; e.ocl_variable_type = OPAL_CMD_LINE_TYPE_NULL; e.ocl_description = desc; e.ocl_otype = OPAL_CMD_LINE_OTYPE_GENERAL; return make_opt(cmd, &e); } /* * Parse a command line according to a pre-built OPAL command line * handle. */ int opal_cmd_line_parse(opal_cmd_line_t *cmd, bool ignore_unknown, bool ignore_unknown_option, int argc, char **argv) { int i, j, orig, ret; ompi_cmd_line_option_t *option; ompi_cmd_line_param_t *param; bool is_unknown_option; bool is_unknown_token; bool is_option; char **shortsv; int shortsc; int num_args_used; bool have_help_option = false; bool printed_error = false; bool help_without_arg = false; /* Bozo check */ if (0 == argc || NULL == argv) { return OPAL_SUCCESS; } /* Thread serialization */ opal_mutex_lock(&cmd->lcl_mutex); /* Free any parsed results that are already on this handle */ free_parse_results(cmd); /* Analyze each token */ cmd->lcl_argc = argc; cmd->lcl_argv = opal_argv_copy(argv); /* Check up front: do we have a --help option? */ option = find_option(cmd, "help"); if (NULL != option) { have_help_option = true; } /* Now traverse the easy-to-parse sequence of tokens. Note that incrementing i must happen elsewhere; it can't be the third clause in the "if" statement. */ param = NULL; option = NULL; for (i = 1; i < cmd->lcl_argc;) { is_unknown_option = false; is_unknown_token = false; is_option = false; /* Are we done? i.e., did we find the special "--" token? If so, copy everying beyond it into the tail (i.e., don't bother copying the "--" into the tail). */ if (0 == strcmp(cmd->lcl_argv[i], "--")) { ++i; while (i < cmd->lcl_argc) { opal_argv_append(&cmd->lcl_tail_argc, &cmd->lcl_tail_argv, cmd->lcl_argv[i]); ++i; } break; } /* If it's not an option, then this is an error. Note that this is different than an unrecognized token; an unrecognized option is *always* an error. */ else if ('-' != cmd->lcl_argv[i][0]) { is_unknown_token = true; } /* Nope, this is supposedly an option. Is it a long name? */ else if (0 == strncmp(cmd->lcl_argv[i], "--", 2)) { is_option = true; option = find_option(cmd, cmd->lcl_argv[i] + 2); } /* It could be a short name. Is it? */ else { option = find_option(cmd, cmd->lcl_argv[i] + 1); /* If we didn't find it, try to split it into shorts. If we find the short option, replace lcl_argv[i] and insert the rest into lcl_argv starting after position i. If we don't find the short option, don't do anything to lcl_argv so that it can fall through to the error condition, below. */ if (NULL == option) { shortsv = NULL; shortsc = 0; ret = split_shorts(cmd, cmd->lcl_argv[i] + 1, &(cmd->lcl_argv[i + 1]), &shortsc, &shortsv, &num_args_used, ignore_unknown); if (OPAL_SUCCESS == ret) { option = find_option(cmd, shortsv[0] + 1); if (NULL != option) { opal_argv_delete(&cmd->lcl_argc, &cmd->lcl_argv, i, 1 + num_args_used); opal_argv_insert(&cmd->lcl_argv, i, shortsv); cmd->lcl_argc = opal_argv_count(cmd->lcl_argv); } else { is_unknown_option = true; } opal_argv_free(shortsv); } else { is_unknown_option = true; } } if (NULL != option) { is_option = true; } } /* If we figured out above that this is an option, handle it */ if (is_option) { if (NULL == option) { is_unknown_option = true; } else { is_unknown_option = false; orig = i; ++i; /* Suck down the following parameters that belong to this option. If we run out of parameters, or find that any of them are the special_empty_param (inserted by split_shorts()), then print an error and return. */ param = OBJ_NEW(ompi_cmd_line_param_t); if (NULL == param) { opal_mutex_unlock(&cmd->lcl_mutex); return OPAL_ERR_OUT_OF_RESOURCE; } param->clp_arg = cmd->lcl_argv[i]; param->clp_option = option; /* If we have any parameters to this option, suck down tokens starting one beyond the token that we just recognized */ for (j = 0; j < option->clo_num_params; ++j, ++i) { /* If we run out of parameters, error, unless its a help request which can have 0 or 1 arguments */ if (i >= cmd->lcl_argc) { /* If this is a help request, can have no arguments */ if ((NULL != option->clo_single_dash_name && 0 == strcmp(option->clo_single_dash_name, "h")) || (NULL != option->clo_long_name && 0 == strcmp(option->clo_long_name, "help"))) { help_without_arg = true; continue; } fprintf(stderr, "%s: Error: option \"%s\" did not " "have enough parameters (%d)\n", cmd->lcl_argv[0], cmd->lcl_argv[orig], option->clo_num_params); if (have_help_option) { fprintf(stderr, "Type '%s --help' for usage.\n", cmd->lcl_argv[0]); } OBJ_RELEASE(param); printed_error = true; goto error; } else { if (0 == strcmp(cmd->lcl_argv[i], special_empty_token)) { fprintf(stderr, "%s: Error: option \"%s\" did not " "have enough parameters (%d)\n", cmd->lcl_argv[0], cmd->lcl_argv[orig], option->clo_num_params); if (have_help_option) { fprintf(stderr, "Type '%s --help' for usage.\n", cmd->lcl_argv[0]); } if (NULL != param->clp_argv) { opal_argv_free(param->clp_argv); } OBJ_RELEASE(param); printed_error = true; goto error; } /* Otherwise, save this parameter */ else { /* Save in the argv on the param entry */ opal_argv_append(¶m->clp_argc, ¶m->clp_argv, cmd->lcl_argv[i]); /* If it's the first, save it in the variable dest and/or MCA parameter */ if (0 == j && (NULL != option->clo_mca_param_env_var || NULL != option->clo_variable_dest)) { if (OPAL_SUCCESS != (ret = set_dest(option, cmd->lcl_argv[i]))) { opal_mutex_unlock(&cmd->lcl_mutex); return ret; } } } } } /* If there are no options to this command or it is a help request with no argument, see if we need to set a boolean value to "true". */ if (0 == option->clo_num_params || help_without_arg) { if (OPAL_SUCCESS != (ret = set_dest(option, "1"))) { opal_mutex_unlock(&cmd->lcl_mutex); return ret; } } /* If we succeeded in all that, save the param to the list on the opal_cmd_line_t handle */ if (NULL != param) { opal_list_append(&cmd->lcl_params, ¶m->super); } } } /* If we figured out above that this was an unknown option, handle it. Copy everything (including the current token) into the tail. If we're not ignoring unknowns, then print an error and return. */ if (is_unknown_option || is_unknown_token) { if (!ignore_unknown || (is_unknown_option && !ignore_unknown_option)) { fprintf(stderr, "%s: Error: unknown option \"%s\"\n", cmd->lcl_argv[0], cmd->lcl_argv[i]); printed_error = true; if (have_help_option) { fprintf(stderr, "Type '%s --help' for usage.\n", cmd->lcl_argv[0]); } } error: while (i < cmd->lcl_argc) { opal_argv_append(&cmd->lcl_tail_argc, &cmd->lcl_tail_argv, cmd->lcl_argv[i]); ++i; } /* Because i has advanced, we'll fall out of the loop */ } } /* Thread serialization */ opal_mutex_unlock(&cmd->lcl_mutex); /* All done */ if (printed_error) { return OPAL_ERR_SILENT; } return OPAL_SUCCESS; } /* * Return a consolidated "usage" message for a OPAL command line handle. */ char *opal_cmd_line_get_usage_msg(opal_cmd_line_t *cmd) { size_t i, len; int argc; size_t j; char **argv; char *ret, line[(MAX_WIDTH * 2) + 1]; char *start, *desc, *ptr; opal_list_item_t *item; ompi_cmd_line_option_t *option, **sorted; opal_cmd_line_otype_t otype; /* Thread serialization */ opal_mutex_lock(&cmd->lcl_mutex); /* Make an argv of all the usage strings */ argc = 0; argv = NULL; ret = NULL; /* First, take the original list and sort it */ sorted = (ompi_cmd_line_option_t **) malloc(sizeof(ompi_cmd_line_option_t *) * opal_list_get_size(&cmd->lcl_options)); if (NULL == sorted) { opal_mutex_unlock(&cmd->lcl_mutex); return NULL; } i = 0; OPAL_LIST_FOREACH (item, &cmd->lcl_options, opal_list_item_t) { sorted[i++] = (ompi_cmd_line_option_t *) item; } qsort(sorted, i, sizeof(ompi_cmd_line_option_t *), qsort_callback); /* Find if a help argument was passed, and return its type if it was. */ otype = get_help_otype(cmd); /* Now go through the sorted array and make the strings */ for (j = 0; j < opal_list_get_size(&cmd->lcl_options); ++j) { option = sorted[j]; if (otype == OPAL_CMD_LINE_OTYPE_PARSABLE) { ret = build_parsable(option); opal_argv_append(&argc, &argv, ret); free(ret); ret = NULL; } else if (otype == OPAL_CMD_LINE_OTYPE_NULL || option->clo_otype == otype) { if (NULL != option->clo_description) { bool filled = false; /* Build up the output line */ memset(line, 0, sizeof(line)); if ('\0' != option->clo_short_name) { line[0] = '-'; line[1] = option->clo_short_name; filled = true; } else { line[0] = ' '; line[1] = ' '; } if (NULL != option->clo_single_dash_name) { line[2] = (filled) ? '|' : ' '; strncat(line, "-", sizeof(line) - strlen(line) - 1); strncat(line, option->clo_single_dash_name, sizeof(line) - strlen(line) - 1); filled = true; } if (NULL != option->clo_long_name) { if (filled) { strncat(line, "|", sizeof(line) - strlen(line) - 1); } else { strncat(line, " ", sizeof(line) - strlen(line) - 1); } strncat(line, "--", sizeof(line) - strlen(line) - 1); strncat(line, option->clo_long_name, sizeof(line) - strlen(line) - 1); } strncat(line, " ", sizeof(line) - strlen(line) - 1); for (i = 0; (int) i < option->clo_num_params; ++i) { char temp[MAX_WIDTH * 2]; snprintf(temp, MAX_WIDTH * 2, " ", (int) i); strncat(line, temp, sizeof(line) - strlen(line) - 1); } if (option->clo_num_params > 0) { strncat(line, " ", sizeof(line) - strlen(line) - 1); } /* If we're less than param width, then start adding the description to this line. Otherwise, finish this line and start adding the description on the next line. */ if (strlen(line) > PARAM_WIDTH) { opal_argv_append(&argc, &argv, line); /* Now reset the line to be all blanks up to PARAM_WIDTH so that we can start adding the description */ memset(line, ' ', PARAM_WIDTH); line[PARAM_WIDTH] = '\0'; } else { /* Add enough blanks to the end of the line so that we can start adding the description */ for (i = strlen(line); i < PARAM_WIDTH; ++i) { line[i] = ' '; } line[i] = '\0'; } /* Loop over adding the description to the array, breaking the string at most at MAX_WIDTH characters. We need a modifiable description (for simplicity), so strdup the clo_description (because it's likely a compiler constant, and may barf if we write temporary \0's in the middle). */ desc = strdup(option->clo_description); if (NULL == desc) { free(sorted); opal_mutex_unlock(&cmd->lcl_mutex); return strdup(""); } start = desc; len = strlen(desc); do { /* Trim off leading whitespace */ while (isspace(*start) && start < desc + len) { ++start; } if (start >= desc + len) { break; } /* Last line */ if (strlen(start) < (MAX_WIDTH - PARAM_WIDTH)) { strncat(line, start, sizeof(line) - strlen(line) - 1); opal_argv_append(&argc, &argv, line); break; } /* We have more than 1 line's worth left -- find this line's worth and add it to the array. Then reset and loop around to get the next line's worth. */ for (ptr = start + (MAX_WIDTH - PARAM_WIDTH); ptr > start; --ptr) { if (isspace(*ptr)) { *ptr = '\0'; strncat(line, start, sizeof(line) - strlen(line) - 1); opal_argv_append(&argc, &argv, line); start = ptr + 1; memset(line, ' ', PARAM_WIDTH); line[PARAM_WIDTH] = '\0'; break; } } /* If we got all the way back to the beginning of the string, then go forward looking for a whitespace and break there. */ if (ptr == start) { for (ptr = start + (MAX_WIDTH - PARAM_WIDTH); ptr < start + len; ++ptr) { if (isspace(*ptr)) { *ptr = '\0'; strncat(line, start, sizeof(line) - strlen(line) - 1); opal_argv_append(&argc, &argv, line); start = ptr + 1; memset(line, ' ', PARAM_WIDTH); line[PARAM_WIDTH] = '\0'; break; } } /* If we reached the end of the string with no whitespace, then just add it on and be done */ if (ptr >= start + len) { strncat(line, start, sizeof(line) - strlen(line) - 1); opal_argv_append(&argc, &argv, line); start = desc + len + 1; } } } while (start < desc + len); free(desc); } } } if (NULL != argv) { ret = opal_argv_join(argv, '\n'); opal_argv_free(argv); } else { ret = strdup(""); } free(sorted); /* Thread serialization */ opal_mutex_unlock(&cmd->lcl_mutex); /* All done */ return ret; } /* * Test if a given option was taken on the parsed command line. */ bool opal_cmd_line_is_taken(opal_cmd_line_t *cmd, const char *opt) { return (opal_cmd_line_get_ninsts(cmd, opt) > 0); } /* * Return the number of instances of an option found during parsing. */ int opal_cmd_line_get_ninsts(opal_cmd_line_t *cmd, const char *opt) { int ret; ompi_cmd_line_param_t *param; ompi_cmd_line_option_t *option; /* Thread serialization */ opal_mutex_lock(&cmd->lcl_mutex); /* Find the corresponding option. If we find it, look through all the parsed params and see if we have any matches. */ ret = 0; option = find_option(cmd, opt); if (NULL != option) { OPAL_LIST_FOREACH (param, &cmd->lcl_params, ompi_cmd_line_param_t) { if (param->clp_option == option) { ++ret; } } } /* Thread serialization */ opal_mutex_unlock(&cmd->lcl_mutex); /* All done */ return ret; } /* * Return a specific parameter for a specific instance of a option * from the parsed command line. */ char *opal_cmd_line_get_param(opal_cmd_line_t *cmd, const char *opt, int inst, int idx) { int num_found; ompi_cmd_line_param_t *param; ompi_cmd_line_option_t *option; /* Thread serialization */ opal_mutex_lock(&cmd->lcl_mutex); /* Find the corresponding option. If we find it, look through all the parsed params and see if we have any matches. */ num_found = 0; option = find_option(cmd, opt); if (NULL != option) { /* Ensure to check for the case where the user has asked for a parameter index greater than we will have */ if (idx < option->clo_num_params) { OPAL_LIST_FOREACH (param, &cmd->lcl_params, ompi_cmd_line_param_t) { if (param->clp_argc > 0 && param->clp_option == option) { if (num_found == inst) { opal_mutex_unlock(&cmd->lcl_mutex); return param->clp_argv[idx]; } ++num_found; } } } } /* Thread serialization */ opal_mutex_unlock(&cmd->lcl_mutex); /* All done */ return NULL; } /* * Return the number of arguments parsed on a OPAL command line handle. */ int opal_cmd_line_get_argc(opal_cmd_line_t *cmd) { return (NULL != cmd) ? cmd->lcl_argc : OPAL_ERROR; } /* * Return a string argument parsed on a OPAL command line handle. */ char *opal_cmd_line_get_argv(opal_cmd_line_t *cmd, int index) { return (NULL == cmd) ? NULL : (index >= cmd->lcl_argc || index < 0) ? NULL : cmd->lcl_argv[index]; } /* * Return the entire "tail" of unprocessed argv from a OPAL command * line handle. */ int opal_cmd_line_get_tail(opal_cmd_line_t *cmd, int *tailc, char ***tailv) { if (NULL != cmd) { opal_mutex_lock(&cmd->lcl_mutex); *tailc = cmd->lcl_tail_argc; *tailv = opal_argv_copy(cmd->lcl_tail_argv); opal_mutex_unlock(&cmd->lcl_mutex); return OPAL_SUCCESS; } else { return OPAL_ERROR; } } /************************************************************************** * Static functions **************************************************************************/ static void option_constructor(ompi_cmd_line_option_t *o) { o->clo_short_name = '\0'; o->clo_single_dash_name = NULL; o->clo_long_name = NULL; o->clo_num_params = 0; o->clo_description = NULL; o->clo_type = OPAL_CMD_LINE_TYPE_NULL; o->clo_mca_param_env_var = NULL; o->clo_variable_dest = NULL; o->clo_variable_set = false; o->clo_otype = OPAL_CMD_LINE_OTYPE_NULL; } static void option_destructor(ompi_cmd_line_option_t *o) { if (NULL != o->clo_single_dash_name) { free(o->clo_single_dash_name); } if (NULL != o->clo_long_name) { free(o->clo_long_name); } if (NULL != o->clo_description) { free(o->clo_description); } if (NULL != o->clo_mca_param_env_var) { free(o->clo_mca_param_env_var); } } static void param_constructor(ompi_cmd_line_param_t *p) { p->clp_arg = NULL; p->clp_option = NULL; p->clp_argc = 0; p->clp_argv = NULL; } static void param_destructor(ompi_cmd_line_param_t *p) { if (NULL != p->clp_argv) { opal_argv_free(p->clp_argv); } } static void cmd_line_constructor(opal_cmd_line_t *cmd) { /* Initialize the mutex. Since we're creating (and therefore the only thread that has this instance), there's no need to lock it right now. */ OBJ_CONSTRUCT(&cmd->lcl_mutex, opal_recursive_mutex_t); /* Initialize the lists */ OBJ_CONSTRUCT(&cmd->lcl_options, opal_list_t); OBJ_CONSTRUCT(&cmd->lcl_params, opal_list_t); /* Initialize the argc/argv pairs */ cmd->lcl_argc = 0; cmd->lcl_argv = NULL; cmd->lcl_tail_argc = 0; cmd->lcl_tail_argv = NULL; } static void cmd_line_destructor(opal_cmd_line_t *cmd) { opal_list_item_t *item; /* Free the contents of the options list (do not free the list itself; it was not allocated from the heap) */ for (item = opal_list_remove_first(&cmd->lcl_options); NULL != item; item = opal_list_remove_first(&cmd->lcl_options)) { OBJ_RELEASE(item); } /* Free any parsed results */ free_parse_results(cmd); /* Destroy the lists */ OBJ_DESTRUCT(&cmd->lcl_options); OBJ_DESTRUCT(&cmd->lcl_params); /* Destroy the mutex */ OBJ_DESTRUCT(&cmd->lcl_mutex); } static int make_opt(opal_cmd_line_t *cmd, opal_cmd_line_init_t *e) { ompi_cmd_line_option_t *option; /* Bozo checks */ if (NULL == cmd) { return OPAL_ERR_BAD_PARAM; } else if ('\0' == e->ocl_cmd_short_name && NULL == e->ocl_cmd_single_dash_name && NULL == e->ocl_cmd_long_name) { return OPAL_ERR_BAD_PARAM; } else if (e->ocl_num_params < 0) { return OPAL_ERR_BAD_PARAM; } /* see if the option already exists */ if (NULL != e->ocl_cmd_single_dash_name && NULL != find_option(cmd, e->ocl_cmd_single_dash_name)) { opal_output(0, "Duplicate cmd line entry %s", e->ocl_cmd_single_dash_name); return OPAL_ERR_BAD_PARAM; } if (NULL != e->ocl_cmd_long_name && NULL != find_option(cmd, e->ocl_cmd_long_name)) { opal_output(0, "Duplicate cmd line entry %s", e->ocl_cmd_long_name); return OPAL_ERR_BAD_PARAM; } /* Allocate and fill an option item */ option = OBJ_NEW(ompi_cmd_line_option_t); if (NULL == option) { return OPAL_ERR_OUT_OF_RESOURCE; } option->clo_short_name = e->ocl_cmd_short_name; if (NULL != e->ocl_cmd_single_dash_name) { option->clo_single_dash_name = strdup(e->ocl_cmd_single_dash_name); } if (NULL != e->ocl_cmd_long_name) { option->clo_long_name = strdup(e->ocl_cmd_long_name); } option->clo_num_params = e->ocl_num_params; if (NULL != e->ocl_description) { option->clo_description = strdup(e->ocl_description); } option->clo_type = e->ocl_variable_type; option->clo_variable_dest = e->ocl_variable_dest; if (NULL != e->ocl_mca_param_name) { (void) mca_base_var_env_name(e->ocl_mca_param_name, &option->clo_mca_param_env_var); } option->clo_otype = e->ocl_otype; /* Append the item, serializing thread access */ opal_mutex_lock(&cmd->lcl_mutex); opal_list_append(&cmd->lcl_options, &option->super); opal_mutex_unlock(&cmd->lcl_mutex); /* All done */ return OPAL_SUCCESS; } static void free_parse_results(opal_cmd_line_t *cmd) { opal_list_item_t *item; /* Free the contents of the params list (do not free the list itself; it was not allocated from the heap) */ for (item = opal_list_remove_first(&cmd->lcl_params); NULL != item; item = opal_list_remove_first(&cmd->lcl_params)) { OBJ_RELEASE(item); } /* Free the argv's */ if (NULL != cmd->lcl_argv) { opal_argv_free(cmd->lcl_argv); } cmd->lcl_argv = NULL; cmd->lcl_argc = 0; if (NULL != cmd->lcl_tail_argv) { opal_argv_free(cmd->lcl_tail_argv); } cmd->lcl_tail_argv = NULL; cmd->lcl_tail_argc = 0; } /* * Traverse a token and split it into individual letter options (the * token has already been certified to not be a long name and not be a * short name). Ensure to differentiate the resulting options from * "single dash" names. */ static int split_shorts(opal_cmd_line_t *cmd, char *token, char **args, int *output_argc, char ***output_argv, int *num_args_used, bool ignore_unknown) { int i, j, len; ompi_cmd_line_option_t *option; char fake_token[3]; int num_args; /* Setup that we didn't use any of the args */ num_args = opal_argv_count(args); *num_args_used = 0; /* Traverse the token. If it's empty (e.g., if someone passes a "-" token, which, since the upper level calls this function as (argv[i] + 1), will be empty by the time it gets down here), just return that we didn't find a short option. */ len = (int) strlen(token); if (0 == len) { return OPAL_ERR_BAD_PARAM; } fake_token[0] = '-'; fake_token[2] = '\0'; for (i = 0; i < len; ++i) { fake_token[1] = token[i]; option = find_option(cmd, fake_token + 1); /* If we don't find the option, either return an error or pass it through unmodified to the new argv */ if (NULL == option) { if (!ignore_unknown) { return OPAL_ERR_BAD_PARAM; } else { opal_argv_append(output_argc, output_argv, fake_token); } } /* If we do find the option, copy it and all of its parameters to the output args. If we run out of parameters (i.e., no more tokens in the original argv), that error will be handled at a higher level) */ else { opal_argv_append(output_argc, output_argv, fake_token); for (j = 0; j < option->clo_num_params; ++j) { if (*num_args_used < num_args) { opal_argv_append(output_argc, output_argv, args[*num_args_used]); ++(*num_args_used); } else { opal_argv_append(output_argc, output_argv, special_empty_token); } } } } /* All done */ return OPAL_SUCCESS; } static ompi_cmd_line_option_t *find_option(opal_cmd_line_t *cmd, const char *option_name) { ompi_cmd_line_option_t *option; /* Iterate through the list of options hanging off the opal_cmd_line_t and see if we find a match in either the short or long names */ OPAL_LIST_FOREACH (option, &cmd->lcl_options, ompi_cmd_line_option_t) { if ((NULL != option->clo_long_name && 0 == strcmp(option_name, option->clo_long_name)) || (NULL != option->clo_single_dash_name && 0 == strcmp(option_name, option->clo_single_dash_name)) || (strlen(option_name) == 1 && option_name[0] == option->clo_short_name)) { return option; } } /* Not found */ return NULL; } static int set_dest(ompi_cmd_line_option_t *option, char *sval) { int ival = atol(sval); long lval = strtoul(sval, NULL, 10); size_t i; /* Set MCA param. We do this in the environment because the MCA parameter may not have been registered yet -- and if it isn't registered, we don't really want to register a dummy one because we don't know what it's type and default value should be. These are solvable problems (e.g., make a re-registration overwrite everything), but it's far simpler to just leave the registered table alone and set an environment variable with the desired value. The environment variable will get picked up during a nromal parameter lookup, and all will be well. */ if (NULL != option->clo_mca_param_env_var) { switch (option->clo_type) { case OPAL_CMD_LINE_TYPE_STRING: case OPAL_CMD_LINE_TYPE_INT: case OPAL_CMD_LINE_TYPE_SIZE_T: opal_setenv(option->clo_mca_param_env_var, sval, true, &environ); break; case OPAL_CMD_LINE_TYPE_BOOL: opal_setenv(option->clo_mca_param_env_var, "1", true, &environ); break; default: break; } } /* Set variable */ if (NULL != option->clo_variable_dest) { switch (option->clo_type) { case OPAL_CMD_LINE_TYPE_STRING: *((char **) option->clo_variable_dest) = strdup(sval); break; case OPAL_CMD_LINE_TYPE_INT: /* check to see that the value given to us truly is an int */ for (i = 0; i < strlen(sval); i++) { if (!isdigit(sval[i]) && '-' != sval[i]) { /* show help isn't going to be available yet, so just * print the msg */ fprintf(stderr, "--------------------------------------------------------------" "--------------\n"); fprintf(stderr, "Open MPI has detected that a parameter given to a command line\n"); fprintf(stderr, "option does not match the expected format:\n\n"); if (NULL != option->clo_long_name) { fprintf(stderr, " Option: %s\n", option->clo_long_name); } else if ('\0' != option->clo_short_name) { fprintf(stderr, " Option: %c\n", option->clo_short_name); } else { fprintf(stderr, " Option: \n"); } fprintf(stderr, " Param: %s\n\n", sval); fprintf(stderr, "This is frequently caused by omitting to provide the parameter\n"); fprintf(stderr, "to an option that requires one. Please check the command line " "and try again.\n"); fprintf(stderr, "--------------------------------------------------------------" "--------------\n"); return OPAL_ERR_SILENT; } } *((int *) option->clo_variable_dest) = ival; break; case OPAL_CMD_LINE_TYPE_SIZE_T: /* check to see that the value given to us truly is a size_t */ for (i = 0; i < strlen(sval); i++) { if (!isdigit(sval[i]) && '-' != sval[i]) { /* show help isn't going to be available yet, so just * print the msg */ fprintf(stderr, "--------------------------------------------------------------" "--------------\n"); fprintf(stderr, "Open MPI has detected that a parameter given to a command line\n"); fprintf(stderr, "option does not match the expected format:\n\n"); if (NULL != option->clo_long_name) { fprintf(stderr, " Option: %s\n", option->clo_long_name); } else if ('\0' != option->clo_short_name) { fprintf(stderr, " Option: %c\n", option->clo_short_name); } else { fprintf(stderr, " Option: \n"); } fprintf(stderr, " Param: %s\n\n", sval); fprintf(stderr, "This is frequently caused by omitting to provide the parameter\n"); fprintf(stderr, "to an option that requires one. Please check the command line " "and try again.\n"); fprintf(stderr, "--------------------------------------------------------------" "--------------\n"); return OPAL_ERR_SILENT; } } *((size_t *) option->clo_variable_dest) = lval; break; case OPAL_CMD_LINE_TYPE_BOOL: *((bool *) option->clo_variable_dest) = 1; break; default: break; } } return OPAL_SUCCESS; } /* * Helper function to qsort_callback */ static void fill(const ompi_cmd_line_option_t *a, char result[3][BUFSIZ]) { int i = 0; result[0][0] = '\0'; result[1][0] = '\0'; result[2][0] = '\0'; if ('\0' != a->clo_short_name) { snprintf(&result[i][0], BUFSIZ, "%c", a->clo_short_name); ++i; } if (NULL != a->clo_single_dash_name) { snprintf(&result[i][0], BUFSIZ, "%s", a->clo_single_dash_name); ++i; } if (NULL != a->clo_long_name) { snprintf(&result[i][0], BUFSIZ, "%s", a->clo_long_name); ++i; } } static int qsort_callback(const void *aa, const void *bb) { int ret, i; char str1[3][BUFSIZ], str2[3][BUFSIZ]; const ompi_cmd_line_option_t *a = *((const ompi_cmd_line_option_t **) aa); const ompi_cmd_line_option_t *b = *((const ompi_cmd_line_option_t **) bb); /* Icky comparison of command line options. There are multiple forms of each command line option, so we first have to check which forms each option has. Compare, in order: short name, single-dash name, long name. */ fill(a, str1); fill(b, str2); for (i = 0; i < 3; ++i) { if (0 != (ret = strcasecmp(str1[i], str2[i]))) { return ret; } } /* Shrug -- they must be equal */ return 0; } /* * Helper function to find the option type specified in the help * command. */ static opal_cmd_line_otype_t get_help_otype(opal_cmd_line_t *cmd) { /* Initialize to NULL, if it remains so, the user asked for "full" help output */ opal_cmd_line_otype_t otype = OPAL_CMD_LINE_OTYPE_NULL; char *arg; arg = opal_cmd_line_get_param(cmd, "help", 0, 0); /* If not "help", check for "h" */ if (NULL == arg) { arg = opal_cmd_line_get_param(cmd, "h", 0, 0); } /* If arg is still NULL, give them the General info by default */ if (NULL == arg) { arg = "general"; } if (0 == strcmp(arg, "debug")) { otype = OPAL_CMD_LINE_OTYPE_DEBUG; } else if (0 == strcmp(arg, "output")) { otype = OPAL_CMD_LINE_OTYPE_OUTPUT; } else if (0 == strcmp(arg, "input")) { otype = OPAL_CMD_LINE_OTYPE_INPUT; } else if (0 == strcmp(arg, "mapping")) { otype = OPAL_CMD_LINE_OTYPE_MAPPING; } else if (0 == strcmp(arg, "ranking")) { otype = OPAL_CMD_LINE_OTYPE_RANKING; } else if (0 == strcmp(arg, "binding")) { otype = OPAL_CMD_LINE_OTYPE_BINDING; } else if (0 == strcmp(arg, "devel")) { otype = OPAL_CMD_LINE_OTYPE_DEVEL; } else if (0 == strcmp(arg, "compatibility")) { otype = OPAL_CMD_LINE_OTYPE_COMPAT; } else if (0 == strcmp(arg, "launch")) { otype = OPAL_CMD_LINE_OTYPE_LAUNCH; } else if (0 == strcmp(arg, "dvm")) { otype = OPAL_CMD_LINE_OTYPE_DVM; } else if (0 == strcmp(arg, "general")) { otype = OPAL_CMD_LINE_OTYPE_GENERAL; } else if (0 == strcmp(arg, "parsable")) { otype = OPAL_CMD_LINE_OTYPE_PARSABLE; } return otype; } /* * Helper function to build a parsable string for the help * output. */ static char *build_parsable(ompi_cmd_line_option_t *option) { char *line; int length; length = snprintf(NULL, 0, "%c:%s:%s:%d:%s\n", option->clo_short_name, option->clo_single_dash_name, option->clo_long_name, option->clo_num_params, option->clo_description); line = (char *) malloc(length * sizeof(char)); if ('\0' == option->clo_short_name) { snprintf(line, length, "0:%s:%s:%d:%s\n", option->clo_single_dash_name, option->clo_long_name, option->clo_num_params, option->clo_description); } else { snprintf(line, length, "%c:%s:%s:%d:%s\n", option->clo_short_name, option->clo_single_dash_name, option->clo_long_name, option->clo_num_params, option->clo_description); } return line; }