dnl -*- autoconf -*- dnl dnl Copyright (c) 2009-2017 Cisco Systems, Inc. All rights reserved dnl Copyright (c) 2014-2018 Research Organization for Information Science dnl and Technology (RIST). All rights reserved. dnl Copyright (c) 2020-2022 Amazon.com, Inc. or its affiliates. All Rights reserved. dnl Copyright (c) 2020 Intel, Inc. All rights reserved. dnl Copyright (c) 2022 IBM Corporation. All rights reserved. dnl $COPYRIGHT$ dnl dnl Additional copyrights may follow dnl dnl $HEADER$ dnl dnl Check for / configure hwloc package. Prefer finding an dnl external hwloc, build our internal one if required. If we can dnl not find an external hwloc and the internal one fails to dnl configure, abort. dnl dnl This macro will change the environment in the following way: dnl dnl * opal_hwloc_mode - either external or internal. If internal, dnl --with-hwloc should be ignored by other packages dnl * CPPFLAGS, LDFLAGS, LIBS - Updated to build against hwloc. dnl Note that the values may be updated right before dnl config.status. dnl dnl OPAL_WRAPPER_FLAGS_ADD will be called to add the correct LDFLAGS, dnl STATIC_LDFLAGS, LIBS, and STATIC_LIBS for hwloc. dnl dnl The following environment variables will only be set if dnl opal_hwloc_mode is "internal": dnl dnl * opal_hwloc_BUILD_CPPFLAGS - the C Preprocessor flags dnl necessary to run the preprocessor on a file which relies dnl on hwloc headers. This will be folded into the global dnl CPPFLAGS (see note above). dnl * opal_hwloc_BUILD_LIBS - the libraries necessary to link dnl source which uses hwloc. Cannot be added to LIBS yet, dnl because then other execution tests later in configure dnl (there are sadly some) would fail if the path in LDFLAGS dnl was not added to LD_LIBRARY_PATH. dnl * opal_hwloc_WRAPPER_LIBS - the linker flags necessary to dnl add to the wrapper compilers in order to link an opal dnl application when opal is built as a static library. AC_DEFUN([OPAL_CONFIG_HWLOC], [ OPAL_VAR_SCOPE_PUSH([external_hwloc_happy internal_hwloc_happy opal_hwloc_STATIC_LDFLAGS opal_hwloc_LIBS opal_hwloc_STATIC_LIBS]) opal_show_subtitle "Configuring hwloc" OPAL_3RDPARTY_WITH([hwloc], [hwloc], [package_hwloc]) # unless internal specifically requested by the user, try to find # an external that works. external_hwloc_happy=0 AS_IF([test "$opal_hwloc_mode" != "internal"], [_OPAL_CONFIG_HWLOC_EXTERNAL( [external_hwloc_happy=1 opal_hwloc_mode="external"], [external_hwloc_happy=0 AS_IF([test "$opal_hwloc_mode" = "external"], [AC_MSG_ERROR([External hwloc requested but not found.])])])]) internal_hwloc_happy=0 m4_ifdef([package_hwloc], [AS_IF([test "$external_hwloc_happy" = "0"], [_OPAL_CONFIG_HWLOC_INTERNAL([internal_hwloc_happy=1 opal_hwloc_mode="internal"])])]) AS_IF([test "$external_hwloc_happy" = "0" -a "$internal_hwloc_happy" = "0"], [AC_MSG_ERROR([Could not find viable hwloc build.])]) dnl this will work even if there is no hwloc package included, dnl because hwloc_tarball and hwloc_directory will evaluate to an dnl empty string. These are relative to the 3rd-party/ directory. OPAL_3RDPARTY_EXTRA_DIST="$OPAL_3RDPARTY_EXTRA_DIST hwloc_tarball" OPAL_3RDPARTY_DISTCLEAN_DIRS="$OPAL_3RDPARTY_DISTCLEAN_DIRS hwloc_directory" OPAL_WRAPPER_FLAGS_ADD([LDFLAGS], [${opal_hwloc_LDFLAGS}]) OPAL_WRAPPER_FLAGS_ADD([STATIC_LDFLAGS], [${opal_hwloc_STATIC_LDFLAGS}]) OPAL_WRAPPER_FLAGS_ADD([LIBS], [${opal_hwloc_LIBS}]) OPAL_WRAPPER_FLAGS_ADD([STATIC_LIBS], [${opal_hwloc_STATIC_LIBS}]) OPAL_WRAPPER_FLAGS_ADD([PC_MODULES], [${opal_hwloc_PC_MODULES}]) AC_CONFIG_COMMANDS_PRE([OPAL_CONFIG_HWLOC_INTERNAL_LIBS_HANDLER]) OPAL_SUMMARY_ADD([Miscellaneous], [hwloc], [], [$opal_hwloc_mode]) OPAL_VAR_SCOPE_POP ]) dnl _OPAL_CONFIG_HWLOC_EXTERNAL(action-if-happy, action-if-not-happy) dnl dnl only safe to call from OPAL_CONFIG_HWLOC, assumes variables from dnl there are set. AC_DEFUN([_OPAL_CONFIG_HWLOC_EXTERNAL], [ OPAL_VAR_SCOPE_PUSH([opal_hwloc_min_num_version opal_hwloc_min_version opal_hwlox_max_num_version opal_hwloc_CPPFLAGS_save opal_hwloc_LDFLAGS_save opal_hwloc_LIBS_save opal_hwloc_external_support]) OAC_CHECK_PACKAGE([hwloc], [opal_hwloc], [hwloc.h], [hwloc], [hwloc_topology_init], [opal_hwloc_external_support=yes], [opal_hwloc_external_support=no]) # need these set for the tests below. opal_hwloc_CPPFLAGS_save=$CPPFLAGS opal_hwloc_LDFLAGS_save=$LDFLAGS opal_hwloc_LIBS_save=$LIBS OPAL_FLAGS_APPEND_UNIQ([CPPFLAGS], [$opal_hwloc_CPPFLAGS]) OPAL_FLAGS_APPEND_UNIQ([LDFLAGS], [$opal_hwloc_LDFLAGS]) OPAL_FLAGS_APPEND_UNIQ([LIBS], [$opal_hwloc_LIBS]) opal_hwloc_min_num_version=OMPI_HWLOC_NUMERIC_MIN_VERSION opal_hwloc_min_version=OMPI_HWLOC_NUMERIC_MIN_VERSION AS_IF([test "$opal_hwloc_external_support" = "yes"], [AC_MSG_CHECKING([if external hwloc version is version OMPI_HWLOC_MIN_VERSION or greater]) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if HWLOC_API_VERSION < $opal_hwloc_min_num_version #error "hwloc API version is less than $opal_hwloc_min_version" #endif ]])], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]) AC_MSG_WARN([external hwloc version is too old (OMPI_HWLOC_MIN_VERSION or later required)]) opal_hwloc_external_support="no"])]) # Ensure that we are not using Hwloc >= v3.x. Open MPI does not # (yet) support Hwloc >= v3.x (which will potentially have ABI and # API breakage compared to <= v2.x), and using it would lead to # complicated failure cases. Hence, we just abort outright if we # find an external Hwloc >= v3.x. AS_IF([test "$opal_hwloc_external_support" = "yes"], [AC_MSG_CHECKING([if external hwloc version is less than version 3.0.0]) opal_hwloc_max_num_version=0x00030000 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ #if HWLOC_API_VERSION >= $opal_hwloc_max_num_version #error "hwloc API version is >= $opal_hwloc_max_num_version" #endif ]])], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]) AC_MSG_WARN([External hwloc version is too new (less than v3.0.0 is required)]) dnl Yes, the URL below will be wrong for master dnl builds. But this is "good enough" -- we're dnl more concerned about getting the URL correct dnl for end-user builds of official release Open dnl MPI distribution tarballs. AC_MSG_WARN([See https://docs.open-mpi.org/en/v$OMPI_MAJOR_VERSION.$OMPI_MINOR_VERSION.x/installing-open-mpi/required-support-libraries.html for more details]) AC_MSG_ERROR([Cannot continue])])]) AS_IF([test "$opal_hwloc_external_support" = "yes"], [AC_CHECK_DECLS([HWLOC_OBJ_OSDEV_COPROC], [], [], [#include ]) AC_CHECK_FUNCS([hwloc_topology_dup])]) CPPFLAGS="$opal_hwloc_CPPFLAGS_save" LDFLAGS="$opal_hwloc_LDFLAGS_save" LIBS="$opal_hwloc_LIBS_save" AS_IF([test "$opal_hwloc_external_support" = "yes"], [dnl Do not add hwloc libs to LIBS until late, because dnl it will screw up other tests (like the pthread tests) opal_hwloc_BUILD_LIBS="${opal_hwloc_LIBS}" $1], [$2]) OPAL_VAR_SCOPE_POP ]) dnl _OPAL_CONFIG_HWLOC_INTERNAL(action-if-happy, action-if-not-happy) dnl dnl Configure the packaged hwloc. Only needs to be run if the dnl external hwloc is not going to be used. Assumes that if dnl this function is called, that success means the internal package dnl will be used. AC_DEFUN([_OPAL_CONFIG_HWLOC_INTERNAL], [ OPAL_VAR_SCOPE_PUSH([subconfig_happy internal_hwloc_location extra_configure_args found_enable_plugins hwloc_config_arg pkg_config_file pkg_config_happy]) extra_configure_args= # look for a --{enable/disable}-plugins option in the top level # configure arguments, so that we can add --enable-plugins if # appropriate. found_enable_plugins=0 eval "set x $ac_configure_args" shift for hwloc_config_arg do case $hwloc_config_arg in --enable-plugins|--enable-plugins=*|--disable-plugins) found_enable_plugins=1 ;; esac done # while the plugins in hwloc are not explicitly using Open MPI's dlopen # interface, it seems rude to enable plugins in hwloc if the builder asked # us not to use plugins in Open MPI. So only enable plugins in hwloc if there's # a chance we're going to do so. We enable plugins by default so that libhwloc # does not end up with a dependency on libcuda, which would mean everything else # would end up with a dependency on libcuda (and similar). AS_IF([test $found_enable_plugins -eq 0 -a "$enable_dlopen" != "no"], [extra_configure_args="--enable-plugins"]) # Note: To update the version of hwloc shipped, update the # constant in autogen.pl. OPAL_EXPAND_TARBALL([3rd-party/hwloc_tarball], [3rd-party/hwloc_directory], [configure]) OPAL_SUBDIR_ENV_CLEAN([opal_hwloc_configure]) PAC_CONFIG_SUBDIR_ARGS([3rd-party/hwloc_directory], [$extra_configure_args], [[--enable-debug]], [subconfig_happy=1], [subconfig_happy=0]) OPAL_SUBDIR_ENV_RESTORE([opal_hwloc_configure]) AS_IF([test ${subconfig_happy} -eq 1], [internal_hwloc_location="3rd-party/hwloc_directory" dnl We do not consider it an error if pkg-config doesn't work / exist / etc. pkg_config_file="${OMPI_TOP_BUILDDIR}/3rd-party/hwloc_directory/hwloc.pc" pkg_config_happy=0 OAC_CHECK_PACKAGE_PARSE_PKGCONFIG([hwloc_internal], [opal_hwloc], [${pkg_config_file}], [pkg_config_happy=1]) dnl Don't pull LDFLAGS, because we don't have a good way to avoid dnl a -L to our install directory, which can cause some weirdness dnl if there's an old OMPI install there. And it makes filtering dnl redundant flags easier. opal_hwloc_LDFLAGS= dnl with no pkg-config data, guess. assume that -L${libdir} is already added to LDFLAGS AS_IF([test $pkg_config_happy -eq 0], [opal_hwloc_STATIC_LDFLAGS= opal_hwloc_LIBS="-lhwloc" opal_hwloc_STATIC_LIBS= opal_hwloc_PC_MODULES=]) # note: because we only ship/commit a tarball (and not the # source directory), the source is always expanded in the # builddir, so we only need to add a -I to the builddir. # Overwrite the OAC_CHECK_PACKAGE_PARSE PKGCONFIG results, # because it's the install dir location, not the build # location. opal_hwloc_CPPFLAGS="-I$OMPI_TOP_BUILDDIR/$internal_hwloc_location/include -I$OMPI_TOP_SRCDIR/$internal_hwloc_location/include" opal_hwloc_BUILD_CPPFLAGS="${opal_hwloc_CPPFLAGS}" # No need to update LDFLAGS, because they will install into # our tree and in the mean time are referenced by their .la # files. opal_hwloc_BUILD_LIBS="$OMPI_TOP_BUILDDIR/$internal_hwloc_location/hwloc/libhwloc.la" opal_hwloc_WRAPPER_LIBS="${opal_hwloc_LIBS}" # no need to add to DIST_SUBDIRS, because we only ship the # tarball. This is relative to the 3rd-party/ directory. OPAL_3RDPARTY_SUBDIRS="$OPAL_3RDPARTY_SUBDIRS hwloc_directory" $1], [$2]) OPAL_VAR_SCOPE_POP ]) dnl We need to delay adding .la files to LIBS until the very end of dnl configure, to avoid pulling it into other configure tests. AC_DEFUN([OPAL_CONFIG_HWLOC_INTERNAL_LIBS_HANDLER], [ OPAL_FLAGS_APPEND_UNIQ([CPPFLAGS], [${opal_hwloc_CPPFLAGS}]) OPAL_FLAGS_APPEND_UNIQ([LDFLAGS], [$opal_hwloc_LDFLAGS]) OPAL_FLAGS_APPEND_MOVE([LIBS], [${opal_hwloc_BUILD_LIBS}]) ])